C41 • C51 • C61 Series |
|
Horizontal Close CoupledThe contractor shall furnish (and install as shown on the plans) an MTH (C41) (C51) (C61) Series horizontal close-coupled centrifugal type pump size_________ stainless construction. Each pump shall have a capacity of ____GPM when operating at a total head of _______feet. Suction pressure will be ____feet with a liquid temperature of ____°F. The pump is to be furnished with 5/8” Type 2106 mechanical seal with stainless steel metal parts, (Buna) (Viton) elastomers, (ceramic seat and carbon primary ring) (Graphite loaded silicon carbide seat and primary ring). A 304 stainless steel shaft shall be furnished in all pumps. The pump casing shall be vertically split, end suction. (Top Discharge) (90° Discharge) (180° Discharge) (270° Discharge) The impeller shall use dynamic thrust balancing. The pump shall be close-coupled to an 80mm “C” face ___HP
___phase ___Hertz ___Volt ___RPM horizontal (Open Drip-Proof) (Totally
Enclosed) motor with a CE Mark and UL rating. |
|